husqvarnaweedeaterguide

In order to replace or clean the main air filter, begin by removing the filter cover that protects the main air filter canister and the component. Ensure that you carefully extract the filter canister without getting any dirt or debris inside the unit as this can be difficult to clean out later. Once you have removed the parts from the unit, carefully turn the canister upside down over a clean surface and slide out the filter element – this may be paper, foam or another material. Without squeezing it too hard, tap the element on a hard surface until most of the dirt fall off the component. If you are not able to get rid of much dirt, it may be time to replace the unit with a new piece. Insert the new filter element into the canister and fasten this back to the chassis of the weed eater. Add a little engine oil to the element before you put in back in the canister. Re-fix the main covering and fasten the bolts.