Husqvarna Edger/Trimmers_325HD75
Husqvarna Edger/Trimmers_325HD75
Handle
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 505289901 | Handle | ||
| 2 | 505289902 | Pin, Cotter 1/8 X 3/4 (2 Req.) | ||
| 3 | 505289903 | Nut Lock Hex 7/16" - 14 (4 Req.) | ||
| 4 | 505289904 | Spring | ||
| 6 | 505289905 | Bolt, Hex 7/16 - 14 X 2 | ||
| 7 | 505289906 | Rod, Clutch & Depth | ||
| 8 | 505289907 | Grip (3 Req.) | ||
| 9 | 505289908 | Lever, Clutch & Depth | ||
| 10 | 505289909 | Throttle Control (3 Hp Ball Brg) (40-3/4) | ||
| 11 | 505289910 | Clip, Throttle Cable | ||
| 12 | 505289911 | Cross Brace For Handle | ||
| 13 | 505289912 | Nut 1/4-28 Hex (10 Req.) | ||
| 14 | 505289913 | Bolt 1/4-28 X 7/8 Hex (6 Req.) | ||
| 15 | 505289913 | Frame, Right Hand 8" | ||
| 16 | 505289915 | Hub Cap For 7" & 8" Rear Wheels | ||
| 505289916 | 8" Rear Wheel Complete W/ Bearings, Wide Tire & Hub Cap | |||
| 505289917 | 8" Rear Wheel Outside Bearing Only | |||
| 505289918 | 8" Rear Wheel Inside Bearing Only. Also For 8" Front Wheel. (2 Needed/Front) | |||
| 16A | 505289919 | 8" Front Wheel Complete W/Bearing & Wide Tire | ||
| 505289920 | 8" Tire Only | |||
| 505289921 | 8" Rear Wheel Rim Only | |||
| 505289922 | 8" Front Wheel Rim Only | |||
| 17 | Engine (Briggs & Stratton Dist.) | |||
| 18 | 505289924 | Bolt 5/16-24 X 1-1/2 (4 Req.) | ||
| 19 | 505289925 | Bolt 5/16-24 X 7/8 Hex (5 Req.) | ||
| 20 | 505289926 | Nut 7/16-14 Hex (3 Req.) | ||
| 21 | 505289927 | 8" Front Axle | ||
| 22 | 505289928 | 8" Front Wheel Spacer (2-13/16" Use With 7075-7 Wheels) | ||
| 23 | 505289929 | Nut 5/16-24 Hex (9 Req.) | ||
| 24 | 505289930 | 8" Fram Crossmember | ||
| 25 | 505289931 | 8" Rear Axle (13-5/8") (Use With 7058 Wheels) | ||
| 26 | 505289932 | Bracket, Engine Pulley Guard | ||
| 27 | 505289933 | Guard, Engine Pulley | ||
| 28 | 505289934 | Engine Pulley Guard & Bracket Complete | ||
| 28 | 505289935 | Screw #10 X X1/2 Sheet Metal (4 Req.) | ||
| 29 | 505289936 | 8" Fram, Left Hand | ||
| 30 | 505289937 | Engine Pulley | ||
| 31 | 525594401 | Set Screw 5/16-24X5/16 | ||
| 33 | 505289938 | Cutterhead Pulley & Shaft Compl. | ||
| 34 | 505289939 | Screw 1/4-20 X 1/2 Hex | ||
| 35 | 505289940 | Cutterhead Pulley Guard | ||
| 36 | 505289941 | Cutterhead Bearing (2 Req.) | ||
| 36A | 505289943 | Spring Washer (New 01/87) | ||
| 37 | 505289942 | Mandrel, Head | ||
| 40 | 505289944 | Clamp, Blade Guard | ||
| 41 | 505289945 | Bolt 1/4-28 X 1-1/2 Hex (2 Req.) | ||
| 42 | 505289946 | Blade Guard Main | ||
| 505289947 | Complete Blade Guard | |||
| 44 | 505289948 | Washer, Friction (2 Req.) | ||
| 45 | 505289949 | Nut 1/2-20 | ||
| 46 | 505289950 | Deflector, Debris Sweep | ||
| 47 | 505289951 | U-Clamp | ||
| 505289952 | Complete Debris Guard | |||
| 49 | 505289953 | Pivot Bolt | ||
| 50 | 505289954 | Flat Washer 7/16 | ||
| 51 | 505289955 | Spring, Head Recoil | ||
| 52 | 505289956 | Cup | ||
| 53 | 505289957 | Body, Cutterhead | ||
| 54 | 505289958 | Lever, Angle Shifting | ||
| 55 | 505289959 | Pin 5/16 X 2 | ||
| 56 | 505289960 | Spring | ||
| 57 | 505289961 | Brace Cutterhead | ||
| 58 | 505289962 | Drive Belt (4L-300) | ||
| 59 | 505289963 | Cutting Blade | ||
| 61 | 505289964 | 1-1/4 Pin | ||
| 62 | 505289965 | U-Clamp Spacer | ||
| 63 | 505289966 | Grease Fitting | ||
| 505289967 | Handle And Wheel Bearing | |||
| 505289968 | Cutting Head Complete (Inc. No 33,53,51,52,54,55,56,61,37,(2)63, (2)36) | |||
| 505289969 | Le475 Decal |