Husqvarna Wheeled Weedtrimmer_HU675HWT
Husqvarna Wheeled Weedtrimmer_HU675HWT
Engine
ID | Part Number | Part Description | Notes | Purchase |
---|---|---|---|---|
1 | Engine, Briggs & Stratton,Model Number 103M02-0008-F1 | For engine service and replacement parts,call Briggs & Stratton at 1-800-233-3723 | ||
2 | 532 15 04-06 | Bolt, Engine Mounting 3/8-16 | ||
3 | 588 45 27-02 | Pulley / Flywheel, Engine | ||
4 | 532 19 74-80 | O-Ring | ||
5 | 501 85 75-01 | Spark Arrester | ||
6 | 582 12 22-01 | Screw | ||
8 | 532 44 68-38 | Handle, Lower | ||
9 | 532 42 88-67 | Screw, Hex Washer Head 5/16-18 x 3/4 | ||
10 | 532 44 68-37 | Handle, Upper | ||
11 | 532 17 09-80 | Bolt, Handle | ||
12 | 532 19 19-38 | Knob, Handle | ||
15 | 532 17 97-51 | Handle Adjuster Assembly | ||
16 | 581 90 21-01 | Guide, Rope | ||
18 | 532 06 64-26 | Wire Tire | ||
19 | 587 56 41-02 | Control Bar Assembly | Includes Trimmer Head Control Lever, Pin and Spring | |
20 | 588 59 92-01 | Engine Brake Control | ||
21 | 532 19 96-87 | Screw 1/4-20 | ||
22 | 532 44 78-29 | Axle Shaft Assembly | ||
23 | 532 42 88-67 | Screw, Hex Washer Head 5/16-18 x 3/4 | ||
24 | 532 16 98-23 | Washer, Axle | ||
25 | 532 08 83-48 | Washer, Flat 1/2 | ||
26 | 585 91 10-01 | Wheel & Tire Assembly 12 x 1-3/4 | ||
27 | 532 40 91-49 | Locknut, Hex 3/8-16 | ||
28 | 584 95 41-01 | Drive Control Cable | ||
30 | 501 92 86-01 | Decal, Warning | ||
31 | 532 42 62-97 | Bracket, Axle | ||
33 | 532 19 17-30 | Nut, Hex | ||
34 | 581 91 26-01 | T-Knob | ||
36 | 532 85 10-84 | Bolt, Hex Head | ||
37 | 532 85 02-63 | Washer, Lock | ||
38 | 532 85 10-74 | Washer, Flat, Hardened | ||
41 | 532 44 83-36 | Tube, Axle | ||
115 04 57-27 | Manual, Operator's, English | |||
115 04 57-31 | Manual, Operator's, French | |||
115 04 57-46 | Manual, Operator's, Spanish |
Chassis Assembly
ID | Part Number | Part Description | Notes | Purchase |
---|---|---|---|---|
1 | 581 70 83-84 | Chassis Assembly | ||
2 | 532 18 22-19 | Line, Trimmer .155 diameter x 18.75 long | ||
3 | 532 17 37-15 | Screw, Self-Tapping 5/16-18 x 1 | ||
4 | 532 18 54-76 | V-Belt | ||
5 | 586 90 91-02 | Bracket, Idler | ||
6 | 532 16 60-42 | Pulley, Idler, V-Groove | ||
7 | 532 17 37-16 | Bolt, Hex Head 3/8-16 x 1.25 | ||
8 | 873 93 06-00 | Locknut, Hex 3/8-16 | ||
9 | 532 16 60-43 | Pulley, Idler, Flat | ||
10 | 532 16 08-29 | Bolt, Shoulder | ||
11 | 873 93 05-00 | Locknut, Hex 5/16-18 | ||
12 | 532 17 37-17 | Spacer | ||
13 | 532 17 47-19 | Bolt, Shoulder | ||
14 | 532 40 91-49 | Locknut, Flange | ||
15 | 532 17 38-11 | Spring, Return | ||
16 | 584 95 32-01 | Deflector, Bottom | ||
17 | 817 06 04-10 | Screw 1/4-20 x 5/8 | ||
18 | 532 17 88-48 | Screw, Hex Washer Head #10-16 x 5/8 | ||
19 | 586 91 66-02 | Belt Keeper | ||
20 | 532 44 66-65 | Cover, Chassis, Top | ||
21 | 532 14 97-46 | Screw #10-24 x 1-3/4 | ||
22 | 873 61 06-00 | Nut, Hex 3/8-24 UNF | ||
23 | 532 85 02-63 | Washer, Lock 3/8 | ||
24 | 819 12 12-14 | Washer, Flat 3/8 | ||
25 | 532 18 03-40 | Pulley, Driven | ||
26 | 532 17 25-51 | Spacer, Pulley | ||
27 | 532 17 45-49 | Bearing | ||
28 | 532 17 25-20 | Jackshaft | ||
29 | 532 18 67-52 | Cover, Chassis, Bottom | ||
30 | 532 17 45-43 | Spindle Housing Assembly | Includes Upper Bearing, Key No. 27 | |
31 | 532 17 45-81 | Ring, Retaining, External, 17mm | ||
32 | 532 17 39-73 | Spring, Locking Plate | ||
33 | 532 17 25-19 | Locking Plate | ||
34 | 532 18 03-38 | Carrier Plate Assembly | ||
35 | 532 18 22-17 | Mow Ball Assembly | Includes Key Numbers 27, 37 and 38 | |
36 | 532 17 25-16 | Cover, Bearing | ||
37 | 532 17 45-80 | Ring, Retaining, Internal, 40mm | ||
38 | 532 17 25-23 | Mow Ball | ||
39 | 532 18 03-34 | Bolt, Mow Ball | ||
40 | 532 18 03-33 | Spindle Assembly, Complete | Includes Key No. 22-28 and 30-39 | |
41 | 532 17 40-29 | Spacer | ||
43 | 532 44 65-67 | Decal, Instruction, RH | ||
45 | 532 18 67-53 | Belt Keeper, Bottom | ||
46 | 817 06 04-08 | Screw, Self-Tapping | ||
47 | 532 44 65-68 | Decal, Instruction, LH |